How to partition your hard drive

How to partition your hard drive

Letters C, D and E are commonly used to represent hard drive partitions or sections of your drive, though other letters are also used. We can say that partition is the separation of a physical drive logically, the appearance shows like a division of more than one physical drive was created.

Some likely terms that would appear when working with disk partition are logical, primary, active and extended partition, There are several reasons why a hard disk partition is a very important, most new computer comes with just one partition, which is the default factory setting, drive ‘C’ as we all know it to is very risky have just one partition, because the index file which feeds the computer information of way all data is located on the system can be corrupted, the computer will be unable to boot up the drive.

After recovery, all your data might not be accessed. Creating a partition helps the computer to treat them as different entities. Disk partitioning allows you to install multiple OS on the same PC, it is compulsory to have more than one partition, because each operating system uses a different partition. It is essential that both operating system files are kept far from each other to avoid a clash.

The smaller the data, better the performance of the hard drive, instead of a big partition. I.e. if about 30% of the hard drive is partitioned, short stroking is allowed, which drastically reduces the number of performance consuming process.

partition your hard drive

It also allows you to organize your data, for pictures, videos, documents etc. can take up a separate partition for better data arrangement and storage. On Windows 7, a disk management tool is provided with a straight user interface, for managing volumes and partitions. Or type ‘partition’ then select ‘create and
format hard disk partition’. Then press ENTER. This launches the disk management feature. you can also launch it via command prompt by typing ‘diskmgmt.msc’.
On the tool, the interface shows the list of all the drives available on the computer. Select the main hard disk you want to partition, mostly it is the one with the largest volume that requires partition, next step is to right click on the selected hard disk and scroll down to the option shrink volume, the system then
queries the hard disk, after that action is done, a new window is created that displayed the initial drive space and space and space available for shrink, a textbox just below is where you can input the desired amount you want to shrink, and that’s the new partition size to be created.

New Simple Volume

You can’t create a partition higher than the space available for the shrink. Then click shrink which processes your request, the time required for this process is determined by the amount to be created. Upon completion of the process, unallocated appears in another window, right click on it and scroll down and select option ‘New Simple Volume’.

An installer wizard appears, click ‘next’ and follow the instructions, specify the same volume you shrunk, and assign a suitable letter, select NTFS, then enter a name of choice, and a window showing the summary then finish the setup. Through these steps, your new partition has been created, without formatting
the entire hard disk and without the of any third party tool.

USE All Steps & work to partition your hard drive In your syestem

Step 1:-Open the Computer Management tool. Click “Open the Start menu“. Type “Computer Management” in the search bar of the “Start menu and press enter”.

Step 2:- Select the Disk Management tool. Click on “Disk Management on the left side the window and you should see all of the disks & partitions on your computer. you See there is 1 disk with two partitions.

Step 3:- Make some space for the new partition. Right-click on the partition you wish to re-size and select the Shrink Volume option. Use To the (C:) drive is used.

Step 4:- Shrink the drive. Enter the size you wish to shrink your drive to in megabytes (1000 MB = 1GB). Then click on the Shrink button.

Step 5:- Create a new volume. You should now see a new unallocated partition in your Disk Management window. Right-click on the unallocated partition and select the New Simple Volume option.

Step 6:- The New Simple Volume Wizard. The New Simple Volume Wizard should popup. Click on the Next button to continue.

Step 7:- Enter size of new partition. Enter the amount of memory you wish to allocate for your new partition and click on the Next button.

Step 8:- Give the new volume a letter name or path. Select from the menu, a letter name for your new partition and click on the “Next” button.

Step 9:- Settings for the new volume. Click on the Format this volume with the following settings:
For File System, select NTFS

Leave a Reply

Your email address will not be published. Required fields are marked *